Holder, rotating beacon

HELLA beacons. Play it safe - with beacons from HELLA. Whenever a special visual warning of dangerous situations is needed, beacons are the answer. This is by far not only the case for rescue operations, but also applies to work operations with large, heavy and/or slow-moving vehicles, such as combine harvesters or heavy goods vehicles. HELLA beacons have a strong warning effect and thus signal to other road users: Attention, please be considerate - work is being done around the vehicle. In this way, our beacons make a strong contribution to more safety. A safety that is achieved, among other things, by the optimal light bundling and distribution, the resulting long range as well as the high luminous intensity of the LED technology used. HELLA beacons are also characterised by outstanding quality in terms of workmanship and stability - the long service life proves it. Don't leave safety to chance - put your trust in HELLA's beacons. Pipe socket fastening - suitable for DIN pipes: The differently shaped vehicle roofs, attachments or small installation spaces do not always allow fixed mounting of the beacon. In order to achieve the legally prescribed 360° warning effect, the beacon must be sufficiently visible. Angle tubes are suitable for this purpose, which are attached to the side of the vehicle, for example, and ensure that the beacon protrudes above the vehicle roof and is clearly visible from all sides. Suitable for a tube diameter of 24 mm, our beacons with tube socket mounting are ideally suited for the DIN tubes that are widely used. These can also be purchased from HELLA as accessories in various versions.

• Slip-on tube for screwing onto a flat cabin roof (angle adjustable on sloping surfaces)
• Beacon adjustable parallel to the road
• Height approx. 105 mm, with rubber plug, socket, 2x hexagonal bolts M8 x 35, 2x hexagonal nuts M8, 2x spring washers, acc. to DIN 14620
• Ø: 24mm - Length: 105mm - with top/with nut/with bolts/screws