Halogen rotating tractor beacons

A halogen rotating tractor beacon is an amber warning lamp in which a 55W H1 halogen bulb sits inside a motor-driven reflector that turns at 90 to 160 revolutions per minute. Rotating beacons were the original fitting on tractors built before 2015, and they remain the direct replacement for a cab roof already wired and drilled for one. This range lists 59 halogen tractor beacons from Hella, with 12V and 24V versions, DIN pole and bolt-on mounts, plus replacement lenses, bulbs and rotor units.

73 products

Halogen rotating tractor beacons: what fails and what to replace

The H1 bulb fails first on a rotating beacon, typically after 300 to 500 hours, and it costs a fraction of a complete beacon. The drive motor and rotor assembly fail second, usually from vibration on the cab roof, and Hella supplies these as separate service parts for the KL 7000 and KL Rotafix families. Amber lenses fade to pale yellow after five to eight years in sunlight and are sold separately, which keeps an older beacon compliant without replacing the base. Replacement bulbs for beacons are H1 12V 55W or H1 24V 70W, and the voltage must match the beacon.

Rotating beacon or LED beacon for a tractor

A rotating halogen beacon draws 4A to 5A at 12V against under 1A for an LED beacon, and the LED unit has no moving parts. A halogen beacon still makes sense in three cases: matching a second beacon already on the cab, keeping the warm rotating light that some drivers prefer, and the lower purchase price. For a new installation the LED tractor beacons page lists sealed units with the same DIN pole and bolt mounts. Both types are available in the full tractor beacons range with 12V and 24V options.

Guides for tractor beacons