LED Light Bars: Are They Road Legal in the UK? E-Marks and MOT
Are LED light bars legal in the UK? When a light bar can be used on the road, which E marks count, the main beam wiring rule, covering bars and the MOT.

In this guide
- Are light bars legal in the UK? The short answer
- How UK law classifies a light bar
- E-mark and approval table for light bars
- The rules for using a light bar as a driving lamp
- Covering or disabling an off-road light bar
- How the MOT treats light bars
- Light bars on tractors and farm vehicles
- Work lamps vs driving lamps: which light bar to buy
- Frequently asked questions
LED light bars are legal to fit in the UK, but you may only switch one on while driving on a public road if it is an approved (E-marked) driving lamp wired to switch off when you dip your headlights. Most light bars are sold as work lamps, which must never be lit while driving.
The rules come from the Road Vehicles Lighting Regulations 1989 (RVLR), which classify lamps by what they do rather than what they look like. This guide explains how the law sees a light bar, which approval marks make one usable on the road, the wiring rule for driving lamps, how to cover or disable an off-road bar, how the MOT treats light bars, and how the same rules apply to tractors.
Are light bars legal in the UK? The short answer
- Fitting a light bar is legal on any vehicle, as long as it is securely mounted.
- Using it as a driving lamp on the road is legal only if it carries an approval mark for a main-beam (driving) function and switches off when the headlamps are dipped. On vehicles first used before 1 April 1991 the approval mark is not required, but the wiring and aim rules still apply.
- Using a work-lamp light bar on the road is not legal while driving. A work lamp may only be lit to light a working area, an accident, a breakdown or roadworks near the vehicle.
- Covering an unapproved bar with an opaque cover takes it out of the lighting rules altogether while it is covered.
- Dazzle is an offence with any lamp, approved or not.
How UK law classifies a light bar
UK lighting law has no category called “light bar”. The RVLR define lamps by function, and a forward-facing light bar falls into one of 2 definitions depending on how it is used:
- Headlamp: “a lamp used to illuminate the road in front of a vehicle and which is not a front fog lamp”. A light bar lit to light the road ahead while driving is legally a headlamp, and a long-range one is a main-beam headlamp.
- Work lamp: “a lamp used to illuminate a working area or the scene of an accident, breakdown or roadworks in the vicinity of the vehicle”. A light bar used to light a field, a yard, a trailer being loaded or a hedge being cut is a work lamp.
Most light bars on the market have no road approval, so they can only be used legally as work lamps. Regulation 27 of the RVLR says a work lamp must not be used so as to cause undue dazzle to the driver of any vehicle, and must not be lit except for the purpose of illuminating a working area, accident, breakdown or works in the vicinity of the vehicle. Driving along a road with a work-lamp bar on breaks both parts of that rule. For the wider difference between these lamp types, see work lights vs driving lights vs fog lights.
E-mark and approval table for light bars
An E-mark is a capital E in a circle followed by a country number, moulded into the lens or printed on the housing, with an approval number that shows which UN regulation the lamp was tested to. The regulation number tells you what the lamp is approved to do. Newer lamps may be approved under UN Regulation 149 (road illumination devices, in force from November 2019) or UN Regulation 148 (light-signalling devices), which took over from the older separate regulations.
| Function | UN regulation | What to look for | Can it be lit while driving? |
|---|---|---|---|
| Driving lamp (main beam) | R112, R113 or R98 (older), R149 (newer) | E-mark with the regulation number and a driving beam (R) class code | Yes, on main beam only, switching off when you dip |
| Front fog lamp | R19 (older), R149 (newer) | E-mark with a front fog class code such as B or F3 | Only in seriously reduced visibility |
| Daytime running lamp | R87 (older), R148 (newer) | E-mark with RL | Yes, in daylight as a DRL, not as a headlamp |
| Front position lamp | R7 (older), R148 (newer) | E-mark with A | Yes, as a sidelight only |
| Amber warning light bar | R65 | E-mark with R65 approval | As a warning beacon, where an amber beacon is allowed |
| Work lamp | No road lighting approval; may carry R10 (EMC) | Often an E-mark with 10R in the number | No; only to light a working area |
One mark causes more confusion than any other. Many light bars carry an E-mark with “10R” in the approval number. That is an R10 electromagnetic compatibility approval: it means the bar’s electronics have been tested for radio interference. It says nothing about the beam, so an R10 mark on its own does not make a light bar road legal. Our guide to E-mark approval explains how to read the full approval number.
Check 3 things before using a light bar on the road: an E-mark on the lens or housing, a regulation number that matches the job (driving beam, not just R10), and a product description that says what it is approved as. A “road legal” claim on a listing with no visible approval mark is marketing, not law.
The rules for using a light bar as a driving lamp
An approved light bar used to light the road is an optional main-beam headlamp under Schedule 5, Part II of the RVLR. That schedule sets 5 requirements:
- Number: any number may be fitted. The RVLR set no maximum for optional main-beam lamps, which corrects the common claim that you can only fit 4.
- Colour: white or yellow.
- Switching: the lamp must either dip, or be switched off by a control that at the same time switches on a dipped beam. In practice that means the bar must go off when you dip your headlamps.
- Aim: the beam must be adjustable while the vehicle is stationary.
- Approval: on a motor vehicle first used on or after 1 April 1991, the lamp must carry an approval mark or the relevant British Standard mark.
Two further rules apply to every headlamp. Regulation 27 makes it an offence to use one so as to cause undue dazzle or discomfort to other road users, and a headlamp must not be lit while the vehicle is parked. A legal driving lamp still has to be switched off for oncoming traffic, when following another vehicle and in towns.
How to wire a light bar to main beam
The legal way to wire a driving lamp is through a relay triggered by the main-beam feed. The relay’s coil takes its feed from the main-beam circuit, and its contacts switch a fused supply from the battery to the light bar. A separate dashboard switch in the relay coil feed lets you choose when the bar comes on, but it can only work with main beam selected. When you dip, the coil loses its feed and the bar goes off, which meets the Schedule 5 switching rule.
Don’t take the light bar’s current straight from the headlamp wiring. A 100W bar draws over 8A at 12V, more than many headlamp circuits are designed to carry. Use a relay rated well above the bar’s current and a fuse sized for the cable. Our 12V relays suit most installations.
Covering or disabling an off-road light bar
An unapproved light bar does not have to come off the vehicle. It can stay fitted as a work lamp, provided it is not lit while driving. Covering it removes any doubt, and the law gives a cover real weight.
Regulation 4(4) of the RVLR says that, for the purposes of the regulations, a lamp is not treated as a lamp if it is so painted over or masked that it is not capable of being immediately used or readily put to use, or if it has no wiring by which it is or can readily be connected to electricity. An opaque cover over the bar, or a bar with its wiring disconnected, is not a lamp in law while it stays that way.
A good cover is opaque, fits tightly enough that it can’t blow off at speed, and is easy to remove for off-road use. A bar left uncovered but switched off is still lawful as a work lamp, but it invites questions at a roadside stop, especially when it is wired to a switch the driver can reach. Covering or disconnecting it is the simplest way to show it isn’t in use.
How the MOT treats light bars
A light bar is not one of the items in the MOT inspection manual for cars and light vans. Section 4 of the manual lists the lamps that are tested: headlamps, position lamps, daytime running and end-outline lamps, stop lamps, indicators and hazards, fog lamps, reversing lamps, number plate lamps, rear reflectors, tell-tales and the trailer socket. Auxiliary driving lamps and light bars are not listed.
So a light bar on its own is not normally an MOT failure, and passing an MOT does not make a light bar legal to use on the road. The rules that matter are the RVLR, enforced at the roadside by the police. The MOT does test that the obligatory headlamps switch correctly between main and dipped beam. It also fails halogen headlamps on vehicles first used on or after 1 April 1986 that have been converted to HID bulbs, or to LED bulbs other than ECE-approved LED replacement (LEDr) bulbs with their approval sticker (accepted from 14 October 2026), which is a separate issue from light bars but often comes up at the same time.
Light bars on tractors and farm vehicles
The same rules apply to a tractor on the public road. A light bar used to light the road ahead is a headlamp and must meet the driving lamp rules. A work-lamp light bar must not be lit while the tractor travels on the road. The difference for farm vehicles is how much of the work happens off the road.
- In the field and the yard: on private land off the road, the RVLR do not control what lamps you use, so a large work-lamp bar on the cab roof is fine for night work.
- Working at the roadside: a work lamp may be lit on the road to light the working area, for example when hedge cutting or at a breakdown, as long as it does not dazzle other drivers.
- Travelling between fields: switch work-lamp bars off at the gate. A cab switch with a tell-tale helps drivers remember.
- No MOT: most tractors are exempt from roadworthiness testing, so enforcement is at the roadside by the police and DVSA.
Amber warning light bars are a different product. A roof-mounted amber light bar approved under UN R65 is a warning beacon, and it follows the beacon rules rather than the headlamp rules. For choosing and fitting a work-lamp bar on a tractor, see our guide to tractor light bars.
Work lamps vs driving lamps: which light bar to buy
The right bar depends on where you will use it:
- Off-road and fieldwork only: a work-lamp bar with a flood or combo beam gives the widest light for the money. It needs no road approval, but should carry R10 EMC approval to limit radio interference. Browse our tractor light bars.
- Night driving on unlit roads: an E-marked driving lamp, either a slim approved bar or round driving lamps, wired to main beam. See our auxiliary lamps.
- Both: fit an approved driving lamp for the road and a separate work-lamp bar for the field, on separate switches.
On tractors with GPS guidance, check the bar’s EMC performance as well as its beam. Our guide to EMC compliant LED work lights explains why some bars interfere with radio and satellite reception.
Frequently asked questions
Is it illegal to have a light bar on your car in the UK?
No. Fitting a light bar is legal. Using it on the road is only legal if it is an approved driving lamp wired to switch off when you dip. An unapproved bar must stay off while you drive, and covering it means it is not treated as a lamp at all.
Do light bars fail an MOT?
Light bars and auxiliary driving lamps are not listed as inspection items in the MOT manual for cars and vans, so a light bar alone is not normally a failure. That doesn’t make it legal to use on the road; the lighting regulations still apply and are enforced at the roadside.
Do I have to cover my light bar in the UK?
There is no rule that every light bar must be covered, but an unapproved bar must not be lit while driving. Under regulation 4(4) of the RVLR, a lamp masked so it can’t be used immediately is not treated as a lamp, so a cover is the clearest way to show an off-road bar isn’t in use.
How many driving lamps can I fit?
The RVLR set no maximum number of optional main-beam lamps. Each must be white or yellow, switch off when you dip, be adjustable for aim and, on vehicles first used from 1 April 1991, carry an approval mark. All of them must still be used without dazzling other road users.
Can I use a light bar on a tractor on the road?
Only if it is an approved driving lamp wired to main beam. A work-lamp light bar may be lit at the roadside to light a working area, such as hedge cutting, but must be switched off while the tractor is travelling on the road.

