Trim Clips and Hardware

Pins, clips, rivets and springs are the small hardware that locates, retains and tensions parts on a tractor: split pins, roll pins, lynch pins and clevis pins, circlips and snap rings, retaining clips, panel and trim clips, blind rivets, self-tapping screws, grommets and compression or extension springs. This range holds hardware by John Deere part number for like-for-like repairs, plus general workshop packs for trailers, implements and cab trim.

1,837 products

Types of hardware in this range

Pins and Clips covers split pins, cotter pins, roll pins, dowel pins, hitch and lynch pins, circlips, snap rings and hair pin clips. Springs covers compression, extension and return springs, including brake and valve springs supplied by part number. Rivets and Rivet Guns covers blind rivets, drive rivets and rivet nuts. Self Tapping Screws covers hexagon head and flanged tapping screws for sheet steel. Panel Clips, Trim Buttons, Fir-Tree Fixings and Push Rivets cover the plastic clips that hold cab panels, mudguards and trim. Grommets covers rubber grommets that protect a cable where it passes through a panel. Clamps, Brackets and Spacers covers block clamps, P-clips, spacers and retainers.

Choosing pins, clips and rivets

Measure the hole diameter and the panel or shaft thickness before ordering; a clip is sized by the hole it fits, a pin by its diameter and length, a rivet by its diameter and grip range. Where the John Deere part number is on the old part, search for it and the page lists the tractor models it fits. Nuts, bolts and washers are under threaded fasteners, and hose clips under tubing and air line. Every item ships with tractor lighting in the same parcel and counts towards free UK mainland delivery over £75.

Guides for trim clips and hardware