Washers and Seals
Washers and seals are the plain washers, spring and lock washers, shouldered and thrust washers, O-rings and sealing washers that sit under fasteners and between parts on a tractor. The range holds John Deere part-number washers and seals with fitment for axle, transmission, hydraulic and body fixings, plus general workshop washers by size.
-
Thrust Washer
In stock £24.77 inc VAT Add to basket -
Thrust Washer
In stock £2.05 inc VAT Add to basket -
Thrust Washer
In stock £3.26 inc VAT Add to basket -
Thrust Washer
In stock £16.61 inc VAT Add to basket -
Thrust Washer
In stock £16.30 inc VAT Add to basket -
Thrust Washer
In stock £19.60 inc VAT Add to basket -
Thrust Washer
In stock £19.39 inc VAT Add to basket -
Thrust Washer
In stock £12.91 inc VAT Add to basket -
Thrust Washer
In stock £1.69 inc VAT Add to basket -
Thrust Washer
In stock £30.82 inc VAT Add to basket -
Thrust Washer
In stock £33.24 inc VAT Add to basket -
Thrust Washer
In stock £14.58 inc VAT Add to basket -
Thrust Washer
In stock £9.16 inc VAT Add to basket -
Thrust Washer
In stock £23.68 inc VAT Add to basket -
Thrust Washer
In stock £1.82 inc VAT Add to basket -
Thrust Washer
In stock £23.50 inc VAT Add to basket -
Thrust Washer
In stock £12.30 inc VAT Add to basket -
Thrust Washer
In stock £7.55 inc VAT Add to basket -
Thrust Washer
In stock £24.92 inc VAT Add to basket -
Thrust Washer
In stock £32.10 inc VAT Add to basket -
Thrust Washer
In stock £8.72 inc VAT Add to basket -
Thrust Washer
In stock £26.52 inc VAT Add to basket -
Thrust Washer
In stock £9.32 inc VAT Add to basket -
Thrust Washer
In stock £3.62 inc VAT Add to basket
Choosing washers and seals
Match a plain washer to the bolt size (M8, M10, 3/8 inch) and the form: Form A is the standard thickness, Form B is thinner and larger. A spring or lock washer goes under a nut that vibrates loose; a shouldered or thrust washer takes load or spacing on a shaft. Sealing washers, such as sump plug and bonded washers, seal a threaded plug against oil and fuel. O-rings are sized by inside diameter and cross-section. Nuts and bolts are under threaded fasteners, and sealants under sealants and adhesives.