Washers and Seals
Washers and seals are the plain washers, spring and lock washers, shouldered and thrust washers, O-rings and sealing washers that sit under fasteners and between parts on a tractor. The range holds John Deere part-number washers and seals with fitment for axle, transmission, hydraulic and body fixings, plus general workshop washers by size.
-
Transmission Shim Retainer
In stock £34.31 ex VAT Add to basket -
Retaining Washer
In stock £6.05 ex VAT Add to basket -
Lock Washer Retainer
In stock £1.37 ex VAT Add to basket -
Washer
In stock £35.98 ex VAT Add to basket -
Washers
In stock £7.94 ex VAT Add to basket -
Lock Washer
Only 1 left £1.75 ex VAT Add to basket -
Washer
In stock £2.86 ex VAT Add to basket -
Stainless Steel Washers A 2 - Din125A M16 ( 17,0 X 30 X 3,0) - (Bl.10 Pcs)
In stock £2.58 ex VAT Add to basket
Choosing washers and seals
Match a plain washer to the bolt size (M8, M10, 3/8 inch) and the form: Form A is the standard thickness, Form B is thinner and larger. A spring or lock washer goes under a nut that vibrates loose; a shouldered or thrust washer takes load or spacing on a shaft. Sealing washers, such as sump plug and bonded washers, seal a threaded plug against oil and fuel. O-rings are sized by inside diameter and cross-section. Nuts and bolts are under threaded fasteners, and sealants under sealants and adhesives.