Fendt Tractor Lights: What Fits and How to Upgrade
How Fendt Tractor Lighting Works A Fendt tractor lighting system is the network of lamps, wiring looms, switches, and electronic control modules fitted to a Fendt tractor for road, field, and yard use. The system splits into 5 functional categories common to every modern AGCO brand: front headlamps for road and forward visibility, work lamps […]
Flasher Lamps and Indicators: How They Work and Common Faults
A flasher lamp is the amber direction indicator fitted to the front, side, or rear of a road-going vehicle that flashes between 60 and 120 times a minute to signal a change of direction. UK law requires every motor vehicle first used on or after 1 April 1986 to carry working flasher lamps on both […]
Licence Plate Lights: Regulations, Replacement, and LED Upgrades
What a Licence Plate Light Does A licence plate light illuminates the rear registration plate so that it can be read from 20 metres at night. The lamp shines white onto the surface of the plate, not directly toward following drivers, and reflects off the plate’s retroreflective coating. The combined effect makes the registration number […]
End Outline Marker Lamps: What They Are and When You Need Them
What an End Outline Marker Lamp Is An end outline marker lamp is a small fixed lamp fitted near the outer edge of a wide vehicle to mark its extreme width to other road users. The lamp shows white to the front, red to the rear, and amber to the side, giving an approaching driver, […]
End Outline Marker Lamps: What They Are and When You Need Them
What an End Outline Marker Lamp Is An end outline marker lamp is a small fixed lamp fitted near the outer edge of a wide vehicle to mark its extreme width to other road users. The lamp shows white to the front, red to the rear, and amber to the side, giving an approaching driver, […]
Hazard Warning Flashers: How They Work and UK Legal Requirements
A hazard warning flasher is the amber indicator system on a road-going vehicle that flashes all four corners at the same time to warn other road users that the vehicle is stationary, broken down, or temporarily obstructing traffic. UK law makes the system mandatory on every motor vehicle first used on or after 1 April […]
LED Rear Lamp Clusters: Benefits of Upgrading from Bulb to LED
An LED rear lamp cluster is a single sealed assembly that combines multiple rear lighting functions (stop, tail, indicator, reverse, fog, and number plate) into one housing, with light emitting diodes as the light source rather than filament bulbs. The cluster fits to tractors, agricultural trailers, vans, and commercial vehicles and replaces the older filament-bulb […]
Daytime Running Lights: UK Rules for Cars, Vans, and Farm Vehicles
A daytime running light (DRL) is a forward-facing white lamp that switches on automatically when the engine starts and operates whenever the vehicle is in motion in daylight, fitted to make the vehicle more visible to other road users. UK law makes DRLs mandatory on all new passenger cars and small commercial vehicles type-approved after […]
Flexi DIN Beacon Mounts: How They Work and When to Use Them
A flexi DIN beacon mount is a flexible vertical pole topped with a 3-pin DIN 14620 connector that bends under impact and returns to vertical without damaging the beacon. The flex is delivered by an internal steel spring or a moulded elastomer section between the base and the beacon connector. The mount fits anywhere a […]
Beacon Mounting Options: DIN Pole, Flexi, Magnetic, and Bolt-On
A beacon mounting option is the physical bracket or pole used to fit a warning beacon to a tractor, trailer or self-propelled machine. The 4 mounting options in routine UK agricultural use are the DIN pole mount, the flexi DIN mount, the magnetic mount, and the bolt-on bracket. Each option uses a different fixing principle, […]